6 pin Plug Adaptor for use with Benelli motorbikes using a Delphi ECU. This adaptor converts a standard 16 pin OBD2 type plug to the 6 pin plug for plugging into your Benelli motorbike diagnostic socket. This adaptor covers latest CAN-Bus and earlier K-Line.
Note: This is for Delphi ECU Benelli models only. Please see picture of what the corresponding socket in your bike should look like.
Use with a diagnostic interface such as our Bluetooth to read OBD2 data from the bike (late models using CAN Bus) Read and reset fault codes.
# 16 pin female to 6 pin Benelli plug
# Fast Dispatch
# Cable length approx 0.20m
# 12 months warranty
# Covers CAN-Bus and K-Line connection
For Benelli motorbikes using Delphi ECU with connector as specified or similar. Typically used with OBD2 scanner or motorbike specific hardware but will work with any software using a similar hardware setup.
Models such as:
BENELLI TNT 135
BENELLI TNT 25
BENELLI TNT 300
BENELLI TNT 302R
BENELLI TNT 600
BENELLI GT 600
BENELLI CAFFENERO 150
BENELLI ZAFFERANO 250
BENELLI TRK 502
1 x 16 pin female socket to 6 pin male Benelli plug